How To Tell If Your Water Softener Is Working?

Today the world’s population has been rising at an alarming rate, and the resources are being used from their reserves. These resources are being depleted due to their unsustainable use. To meet the demands, the use of alternative methods to produce the elements from their waste form is being practised. One commodity is water. Hard water is generally of no use for any domestic purposes or drinking. The hard water containing complex salts is softened to be used for domestic purposes. You might have a water softener but how to tell if your water softener is working?

To soften the water, specially designed water softening units are used which help in the breakdown of these salts. The hard water can damage pipelines, form deposits, and cause unwanted effects on your skin and hair. Hence a proper water softener is required for this purpose. Let us understand a few basics about water softening. 

Basics Of Water Softening 

Usually, hard water contains a salt of magnesium and calcium in carbonates or other complex forms. The main aim of the water softening process is to convert them to sodium ions and hence soften them. However, as easy as it sounds, it involves the use of selective semi-permeable membranes that trap the hard calcium, and magnesium salts, and exchange them with sodium ions. Hence they are used for obtaining soft water from their other ends. It is the essential possession of converting hard water into soft water. To know whether the water softening unit is working or not, you must always check whether your softening bed is regenerating or not. Regeneration is the process of replenishing the bed now full of calcium and magnesium again with sodium. 

How To Check The Water Softening Unit? 

Usually, the modern water softeners have a time-based regeneration, so if you are facing some issues with regeneration, you can easily go in the settings to check the interval of regeneration, if they have been carried out successfully or not. Even having a look at the bed is a good option. It is what happens in a demand initiated regeneration, using the water that has been purified, you can regenerate at your ease. Having a look at the bed, you can tell if your softening unit is properly exchanging the salts. One of the easiest ways to detect this is by conducting the soap test with your hard water. Hard water generally doesn’t lather or create foam with any soap. It is how you know whether hard water has been softened or not. 

What Could Keep Water Softening Units From Functioning? 

  • Usually, there’s some issue in the control valve or the bed that allows untreated or hard water to pass through 
  • Some issues with the regeneration bed or the exchange resins. 
  • Deposit accumulation like that of hard salts like calcium or magnesium could cause the failure of motors if worn out due to maintenance hassles.

Having listed down the ways to determine if your softening unit is properly exchanging the resins of sodium ions with calcium and magnesium or not. It gives the water softening units quite an easy purpose. With the regeneration on time, the hard water, consisting of calcium and magnesium ions can easily be softened if proper maintenance is provided. With the depleting resources, this is an essential commodity for regenerations to do the domestic chores. Untreated hard water may ruin your skin,  hair, clog the pipes and impeller units. Make sure you use these tips in case your unit seems to have gone down. Contact our team today to find out more.